ECO are the originators of and Design Award Winners for Desk-Top screens. Over the last sixteen years we have constantly re-invested in extensive research and tooling to build up a library of off-the-shelf fixings that enable almost any desk ever made to be retro-fitted with screens.


It is a matter of company policy that should standard fixings not be suitable for a particular customer, that whenever possible the company will manufacture individual bespoke fixings at moderate extra cost.
Alongside the choice of fixings, the screen itself has been developed to offer vision panels, off-desk storage and a choice of shapes.

Made in one standard thickness of 38mm, the DT range of screens and clamps are designed so that the screen sits on top of the desk surface with an 8mm gap at the base for cable feeds.
Primarily intended for screening the back of individual or straight rows of desking, it must be borne in mind when fitting side screens, that the back screen will already occupy 38mm of the desk width.

The fixing clamps in the DT range are designed so that the screen sits on top of the desk with an 8mm gap for cable feeds. DT Screens have non linking ends and are used for single desks or straight row installations. If side dividers are used in the DT range, please remember when measuring, that the rear screen will already occupy 38mm of the desk’s overall width. Clamps are fitted in set positions, so at the point of manufacture we can move the clamps to almost any where on the screen at no extra charge, this may help if you have a pedestal or a leg in the way.

With the clamp system in the SM range, screens exactly fit around the desk edges,
allowing all three sides to be screened, and allowing desks to be grouped into clusters in
whatever number of desks or angles that are required.

The 100mm of screen that projects below the desk, is not counted in the sizing. SM Screens have linking ends and are engineered to allow a 5mm gap between desk edge and the screen for cable feeds from any screened side. Clamps are fitted in set positions, so at the point of manufacture we can move the clamps to almost any where on the screen at no extra charge, this may help if you have a pedestal or a leg in the way.

The Desk-Top Full Radius option come available in 4 standard heights 55cm, 45cm, 35cm and 25cm. Once you have chosen the height and width which you require this then sets the size of the curve; as one end of the screen will be the height you choose and the other will be 00cm.

With the Shaped option you can choose any of the 4 heights to achieve your required angle, e.g. if the first height is 55cm then you can have the second height for the other end of the screen at 45cm, 35cm or 25cm then by any width.

The Angled options you can choose from any of the 4 heights to achieve your required angle, e.g. if the first height you choose is 55cm then the height for the other end of the screen will be either 45cm, 35cm or 25cm then by any width.

For the Full Angle option you can choose any of the 4 heights to achieve your required angle, e.g. if the first height is 55cm then the other height would be 00cm which is down to the top of the desk then by any width.

The internal board is made from the same material as EAD pinboards, this board has self-healing properties to help combat board fatigue.